Рассылка

Для того, чтобы получать уведомления о новых номерах журнала, оставьте свой E-mail адрес.



ЭКСПРЕСС-МЕТОД ОПРЕДЕЛЕНИЯ СЕБЕСТОИМОСТИ ПРОДУКЦИИ ПРИ РАСЧЕТЕ ТЕХНИКО-ЭКОНОМИЧЕСКИХ ПОКАЗАТЕЛЕЙ ДЕРЕВООБРАБАТЫВАЮЩИХ ЦЕХОВ

Авторы: А.А. Лукаш, Т.И. Глотова, Н.П. Малышева, Н.П. Путрова, О.Н. Чернышев

В статье изложены вопросы применения более простого метода определения себестоимости продукции при расчете технико-экономических показателей деревообрабатывающих цехов. Заgрет на вывоз необработанной древесины позволяет увеличить объемы лесопереработки внутри страны, повысить добавленную стоимость экспорта и повысить налоговые поступления в федеральный бюджет. В связи с этим для обеспечения эффективности лесопереработки ожидается приток инвестиций для приобретения новой техники и/или помещений для обработки круглых лесоматериалов. А это в свою очередь потребует проведения технико-экономического анализа при выборе вида выпускаемой продукции, технологии и оборудования. По существующей методике технологический расчет расхода сырья и материалов для производства изделия производится для каждой детали отдельно. А затем производится суммирование сырья и материалов для производства всех деталей в изделии. При большом количестве деталей в изделии это весьма трудоемко. Трудоемкость значительно возрастает, если планируется выпуск нескольких изделий. Поэтому предложен более постой (укрупненный) метод расчета сырья и материалов для одной детали с усредненными размерами по спецификации деталей и их количества, которая составляется на основе разработанной конструкции изделия. При определении технико–экономической эффективности производства производится расчет себестоимости по следующим основным статьям затрат: сырье, материалы, топливо и энергия, оплата труда, отчисления во внебюджетные фонды, амортизация, производственные и непроизводственные расходы. Предложен экспресс-метод определения величины себестоимости продукции на основе затрат на сырье и материалы. Показано на примере практическое применение экспресс-метода расчета себестоимости при составлении при расчете технико-экономических показателей нового мебельного цеха при изготовлении шкафа трех дверного из ЛДСтП.

Ключевые слова: деревообработка, метод, себестоимость продукции, технико-экономическая эффективность.

 

THE EXPRESS METHOD OF DETERMINING THE COST OF PRODUCTION IN THE CALCULATION OF TECHNICAL AND ECONOMIC INDICATORS OF WOODWORKING SHOPS

The article proposes a new method for assessing the strength of adhesive joints at normal separation of the layer, which can be used in the development of new adhesive compositions. The applied modifying additives of various types allow to improve the technological and operational properties of adhesives used in gluing wood. Therefore, the improvement of the technology of glued materials is based on the development of new types of adhesives and adhesive compositions. In the course of research to establish the type and composition of modifying additives, a large number of experiments are carried out related to the establishment of the effect of the adhesive composition on the bonding strength. Currently, in most cases, adhesion is evaluated by an indirect criterion - the wetting edge angle, which is unstable in time due to the absorption of spreading and the absorption of glue by wood. The standard method for determining the strength when chipping along the adhesive layer is quite time-consuming, because it includes operations for sawing out bars, planing into size, subsequent gluing of bars, re-machining of glued bars after complete curing of the glue to give the samples the required size and shape. Which is laborious enough. In order to reduce the complexity of conducting research on the development of new adhesive compositions, a new method for determining the strength of the adhesive joint at normal separation has been developed. The strength of the adhesive according to the proposed method is estimated by the maximum load required for normal separation of the layer. The devices (grips) used are easy to manufacture and reliable during operation. The new proposed method for determining the bonding strength is less time-consuming than the standard method, because repeated machining of glued bars is not required, and the samples after curing the glue have the required dimensions and shape and are ready for testing. An example of the implementation of the proposed new method for assessing the strength of bonding at normal separation for the establishment of a new composition of glue (mastic) in the manufacture of a baguette for art frames is given.

Keywords: strength for normal separation, bonding, wood, method, modifying additives.